STAR-H's signature line of optimized extremely wide bandwidth (”Double Egg-Beater”) antennas provide a superior solution for communications or measurement and testing systems requiring large instantaneous bandwidths with very flat impedance requirements. By using computer optimization techniques, STAR-H engineers were able to design a unique wideband dipole antenna with low VSWR, high efficiency, and lightweight rugged construction.
STAR-H carries a line of accessories to make carrying, setting up, and installing your ultra-wideband antennas easy. Developed from experience in the field and in cooperation with the needs of our customers, these accessories are designed with you in mind.
Carrying Bags
For an economical, light-weight solution for storing and carrying our ulta-wideband antennas without the need for extreme ruggedness and air transport requirements, consider nylon carrying bags. These carrying bags are hand-crafted in the United States to survive adverse environments and provide moderate protection, and they are available in both black and olive drab color.
Bags include additional internal space and accessory pockets for carrying extra hardware and reserve parts for the unlikely event that the antenna needs repair. Bags also include identification tags and holders for quick reference and storage.
For the 30-90 MHz antenna, the antenna is placed in the bag disassembled, and only the quick-release field version may be stored in these bags. For other frequencies, the antenna is stored assembled.
ATA Shipping Cases
Standard
bnlah blah
Rugged
blah blah
Wall Mount Kit
Galvanized Iron
blah blah
Aluminum
blah blah
Stainless Steel
hblah blah
Tripods
$95 or $100
Leveraging its Custom Antenna Engineering capabilities, STAR-H is able to quickly tailor its wideband dipole antennas to customer needs. The standard frequency ranges offered in our catalog cover most typical frequencies, but we realize the ever-changing needs of high performance radio systems and are willing to make sure our products meet your demands. Not only is STAR-H capable of expanding or focusing its wideband diple antennas to specific frequencies, but they can also be modified for special applications, such as low visibility requirements.
We routinely configure and optimize our systems for different frequencies on-demand, and because of our experience and in-house processes and algorithms, we are able to do so with minimal additional cost and effort. Our flexible systems are adaptable, preventing the need to begin "from scratch" with each new frequency band.
| For information regarding configuring our ultra-wideband dipoles for a particular frequency range, please submit a Product Inquiry or Contact Us with your specifications. |
Features
| Product Pricing | |
| Bare | $1,050/unit* |
|
|
| Black Anodize | $1,700/unit* |
|
|
|
Color Anodize |
$1,975/unit* |
|
|
|
*Prices are for single quantities Contact us for ordering or volume discount information |
|
- Reduced visual exposure
- Nearly equivalent performance characteristics to the standard version
- Fully weatherized
- Durable aluminum alloy construction
- Optional fiberglass mounting tube
- Optional anodized finish
- Shipped pre-assembled
Specifications
| Base Model Number | SHWB-02-500-450-XX* |
| Frequency Range | 200 MHz - 700 MHz |
| Maximum Input Power | 250 W |
| Maximum Input VSWR | 3.0:1 |
| Nominal Impedance |
50 Ω |
| Polarization | Linear |
| Maximum Gain | ≈ 2.1 dBi |
| Pattern Type | Approx. Dipole Equivalent |
| Material | Aluminum |
|
Standard RF Connector |
N-Type Female |
| Height Inches [cm] | 17.5 [45] |
| Width Inches [cm] | 11.3 [29] |
| Depth Inches [cm] | 11.3 [29] |
| Weight Lbs. [kg] | 1 [0.45] |
| Connector Options |
N-Type Female Custom |
| Shipping Length Inches [cm] | 16 [41] |
| Shipping Width Inches [cm] | 9 [23] |
| Shipping Height Inches [cm] | 3 [8] |
*See below for finish options. Antennas must be hard anodized. Specify color, if any, when ordering.
Options and Accessories
| Carrying Bag | SHAA-02-500-450-BX |
| Fiberglass Mast | SHWB-05-500-450-P0 |
| Mast Adapter | Contact STAR-H |
| Black Anodized Finish | SHWB-02-500-450-A0 |
| Olive Drab Anodized Finish | SHWB-02-500-450-A5 |
| Desert Sand Anodized Finish | SHWB-02-500-450-A1 |
| Steel Grey Anodized Finish | SHWB-02-500-450-A8 |
| Custom Color | Contact STAR-H |
| STAR-H reserves the right to change published product specifications at any time due to (a) continual improvement of its product families, (b) to correct inadvertent typographical errors, or (c) to reflect improvements in manufacturing process. STAR-H can supply exact technical specifications with each quote or order. Traceability and configuration management information is always maintained for each individual product. Please contact STAR-H for further information. |
Features
| Product Pricing | |
| Bare | $1,050/unit* |
|
|
| Black Anodize | $1,700/unit* |
|
|
|
Color Anodize |
$1,975/unit* |
|
|
|
*Prices are for single quantities Contact us for ordering or volume discount information |
|
- Reduced visual exposure
- Nearly equivalent performance characteristics to the standard version
- Fully weatherized
- Durable aluminum alloy construction
- Optional fiberglass mounting tube
- Optional anodized finish
- Shipped pre-assembled
Specifications
| Base Model Number | SHWB-02-420-340-XX* |
| Frequency Range | 130 MHz - 550 MHz |
| Maximum Input Power | 250 W |
| Maximum Input VSWR | 3.0:1 |
| Nominal Impedance |
50 Ω |
| Polarization | Linear |
| Maximum Gain | ≈ 2.1 dBi |
| Pattern Type | Approx. Dipole Equivalent |
| Material | Aluminum |
|
Standard RF Connector |
N-Type Female |
| Height Inches [cm] | 26 [66] |
| Width Inches [cm] | 14 [36] |
| Depth Inches [cm] | 14 [36] |
| Weight Lbs. [kg] | 1.5 [0.7] |
| Connector Options |
N-Type Female Custom |
| Shipping Length Inches [cm] | 30 [76] |
| Shipping Width Inches [cm] | 15 [38] |
| Shipping Height Inches [cm] | 15 [38] |
*See below for finish options. Antennas must be hard anodized. Specify color, if any, when ordering.
Options and Accessories
| Carrying Bag | SHAA-02-420-340-BX |
| Fiberglass Mast | SHWB-05-420-340-P0 |
| Mast Adapter | Contact STAR-H |
| Black Anodized Finish | SHWB-02-420-340-A0 |
| Olive Drab Anodized Finish | SHWB-02-420-340-A5 |
| Desert Sand Anodized Finish | SHWB-02-420-340-A1 |
| Steel Grey Anodized Finish | SHWB-02-420-340-A8 |
| Custom Color | Contact STAR-H |
| STAR-H reserves the right to change published product specifications at any time due to (a) continual improvement of its product families, (b) to correct inadvertent typographical errors, or (c) to reflect improvements in manufacturing process. STAR-H can supply exact technical specifications with each quote or order. Traceability and configuration management information is always maintained for each individual product. Please contact STAR-H for further information. |
Features
| Product Pricing | |
| Standard | Contact Us for Pricing |
|
|
|
Contact us for ordering information |
|
- Compact design for easy concealment
- Durable construction and unobtrusive
- Excellent performance
- No assembly required
- Ideal for testing and monitoring, wideband communications, and signal monitoring
Specifications
| Base Model Number | SHWB-01-2500-2750-XX |
| Frequency Range | 1.5 GHz - 4 GHz |
| Maximum Input Power | 25 W |
| Maximum Input VSWR | 3.0:1 |
| Nominal Impedance |
50 Ω |
| Polarization | Linear |
| Maximum Gain | ≈ 2.1 dBi |
| Pattern Type | Approx. Dipole Equivalent |
| Material | PTFE, Aluminum |
|
Standard RF Connector |
SMA Male Pigtail |
| Height Inches [cm] | 2.4 [6.1] |
| Width Inches [cm] | 1.3 [3.3] |
| Depth Inches [cm] | 1.3 [3.3] |
| Weight Lbs. [kg] | 0.3 [0.14] |
| Connector Options |
SMA Male Pigtail Custom |
| Shipping Length Inches [cm] | 4 [10.1] |
| Shipping Width Inches [cm] | 4 [10.1] |
| Shipping Height Inches [cm] | 4 [10.1] |
Options and Accessories
| Custom Mounting Options | Contact STAR-H |
| Custom RF Connector | Contact STAR-H |
| Large Volume Orders | Contact STAR-H |
| Custom Input Power | Contact STAR-H |
| STAR-H reserves the right to change published product specifications at any time due to (a) continual improvement of its product families, (b) to correct inadvertent typographical errors, or (c) to reflect improvements in manufacturing process. STAR-H can supply exact technical specifications with each quote or order. Traceability and configuration management information is always maintained for each individual product. Please contact STAR-H for further information. |
Features
| Product Pricing | |
| Bare | $1,050/unit* |
|
|
| Black Anodize | $2,025/unit* |
|
|
|
Color Anodize |
$2,025/unit* |
|
|
|
*Prices are for single quantities Contact us for ordering or volume discount information |
|
- Small size
- Durable aluminum alloy construction
- Fully weatherized
- Optional fiberglass mounting tube
- Optional anodized finish
Specifications
| Base Model Number | SHWB-01-1000-1000-XX* |
| Frequency Range | 500 MHz - 1500 MHz |
| Maximum Input Power | 50 W |
| Maximum Input VSWR | 2.5:1 |
| Nominal Impedance |
50 Ω |
| Polarization | Linear |
| Maximum Gain | ≈ 2.1 dBi |
| Pattern Type | Approx. Dipole Equivalent |
| Material | Aluminum |
|
Standard RF Connector |
SMA Female |
| Height Inches [cm] | 6.6 [16.8] |
| Width Inches [cm] | 3.6 [9.2] |
| Depth Inches [cm] | 3.6 [9.2] |
| Weight Lbs. [kg] | 0.6 [0.27] |
| Connector Options |
SMA Female Custom |
| Shipping Length Inches [cm] | 8 [21] |
| Shipping Width Inches [cm] | 10 [26] |
| Shipping Height Inches [cm] | 12 [30] |
*See below for finish options. Antennas must be hard anodized. Specify color, if any, when ordering.
Options and Accessories
| Carrying Bag | SHAA-01-1000-1000-BX |
| Fiberglass Mast | SHWB-05-1000-1000-P0 |
| Mast Adapter | Contact STAR-H |
| Black Anodized Finish | SHWB-01-1000-1000-A0 |
| Olive Drab Anodized Finish | SHWB-01-1000-1000-A5 |
| Desert Sand Anodized Finish | SHWB-01-1000-1000-A1 |
| Steel Grey Anodized Finish | SHWB-01-1000-1000-A8 |
| Custom Color | Contact STAR-H |
Kit Contents
- 16 radiating aluminum elements
- 2 end hubs
- 1 center hub with insulator
- Allen key tool for assembly
Contents of custom versions may differ
STAR-H reserves the right to change published product specifications at any time due to (a) continual improvement of its product families, (b) to correct inadvertent typographical errors, or (c) to reflect improvements in manufacturing process. STAR-H can supply exact technical specifications with each quote or order. Traceability and configuration management information is always maintained for each individual product. Please contact STAR-H for further information.
